Skip to main content

VLAN

 

VLAN


This is our set up, the two computers on the side are part of the Preminger VLAN. theses computers can interact with each other but not with the other 2 computers on the Jafar VLAN. Below is the step by step process of how these two VLAN's were created.

I manually added the VLAN's to the data base as seen below. 




Network table

Device name

IP address

Subnet mask

Default gateway

PC 0

198.162.10.1

255.255.255.0

N/A

PC 1

198.162.10.2

255.255.255.0

N/A

PC 2

198.162.10.3

255.255.255.0

N/A

PC 3

198.162.10.4

255.255.255.0

N/A

Comments

Post a Comment

Popular posts from this blog

Types of network adapters in virtual box

  Types of network adapters in VirtualBox In VirtualBox there’s multiple types of network adapters that can be used to configure virtual machines for different networking needs. Down below will give you a brief overview of each type. NAT (network address translation) The VM is placed behind a VirtualBox-managed router. This allows the VM to access the external network via the networks host’s IP, but the VM itself remains invisible to the outside. Its most suitable for simple internet access with minimal configuration NAT network This is like NAT, but it allows multiple VM’s to communicate with each other in the same NAT network all while sharing the host’s internet connection. Its commonly used when you want to simulate a small, isolated network of VM’s that can also access the internet. Bridged adapter This VM is connected directly to the physical network as if it is a separate device, it also receives its own IP address from the same network as the host. This is ide...
Post a Comment
Read more

API's

  API's Types of API's REST API - Representational State Transfer is a commonly used API category that isn’t dependent on a specific protocol. It’s considered a relatively user-friendly API to work with and many developers are experienced in this technology. It’s an architecture style of communicating interfaces. SOAP API - Simple Object Access Protocol is an API that connects different platforms together through HTTP and XML. Its relatively older than other API implementations, but it provides more security as it follows strict protocols. It’s a protocol for communication between applications. ASP.NET API - Specific form of REST API developed around .NET technology. REST vs SOAP Both have some similarities for instance they both support SSL/TLS for secure and encrypted communications, also they both use HTTP to exchange information. When deciding which API to use you must take in many factors into consideration like, security, ACID compliance, and overall application design. F...
Post a Comment
Read more
  Designing a SOHO network with DHCP Network requirements for the office Sales department – 4 computers Finance department – 3 computers Networking devices requirement: ·          1 router ·          2 switches (one for each department) ·          1 DHCP server Documentation I started by setting up the network topology and used the automatic connecting cable to connect all the devices together. Then I configured the server with IPv4 address and a subnet mask. to do this you have to press on the server and then go to desktop. Then I filled in all the parameters as seen below. Then I had to configure the DHCP server. To do this I clicked on the server > services > DHCP. Then I turned on the serves and configured the server as seen in this screenshot. For the next step I configured the router with the IPv4 address and subnet mask. To a...
Post a Comment
Read more